Technical information

Serial Solution Reference
Contents._________
Chapter 1. What You Must Do First.
System Requirements. 1
Up And Running Within Ten Minutes. 2
Configuring Your System. 3
Setting Up For COM3. 4
Setting Up For COM4. 5
COM1-4 Defaults. 5
COM5 And Above. 5
Address Selection. 6
Interrupt Selection. 7
Multiport Serial Cards. 8
AST Four Port Card. 9
Lynx And Quad Cards. 9
Handshake Selection. 10
RS232 Handshake Lines. 11
RS422 Handshaking 13
RS485 Handshake Lines. 14
Chapter 2. NewCOM.sys Parameters
Introduction. 18
Driver Commands. 18
Valid Parameters. 18
Driver Defaults. 21
/A I/O Address. 23
/B Number Buffers. 24
/H Hardware Handshake. 25
/I Interrupt. 27
/L Lynx 8 Port and Quad RS232 cards. 29
/O Omit Port From Serial Solution Control. 32
/S Buffer Size. 33
/X Software Handshaking. 34
XON/XOFF Handshake. 35
Intro-8