Technical information

Cterm Serial Solutions
are
selecte
d the
serial
hardw
are
interpr
ets 2
stop
bits as
1 1/2
bits.
Data Number of data bits. 5, 6, 7 or 8.
Baud Baud rate. The CTERM function prefer_baud()
is used to check and translate this.
Bios_x_init returns a true flag to show that is has checked its
parameters, found them to be ok, and used them to set the serial
port. If the parameters are bad then a false flag is returned and
the serial port is left alone.
Fitting The Parts Together.________________________
The main() function of CTERM is shown in below.
Chapter 7 Page 125