Datasheet

[phone] [e-mail] www.brainboxes.com
ED-538 Ethernet 8 DI + 4 Relays
Watchdog feature:
Allows independent known good states to be set for power up, comms link watchdog and
hardware watchdog. Programmable time range allows full control.
Lifetime Warranty and Support:
We can help with every aspect of your project, from getting you up and running to custom
application.
Signed Drivers and Rigorous testing:
Our software allows hassle free installation, conguration and monitoring via our easy to
use webpage. The software gives local COM ports that are backwards compatible enabling
legacy applications and the device to work with a myriad of different 3rd party software.
Wide Range Redundant Dual Power Input:
+5VDC to +30VDC accommodates variation in the +24VDC factory oor and allows
alternative power sources. A second power supply can be tted as a back-up to prevent down
time should one power source fail.
Power from any USB Port:
Can use 5 Volt power from any computer USB port via optional accessory cable PW-650.
Useful for conguring the device from a laptop in the eld.
Gateway RS485 Serial Port:
Half duplex RS485 port allows connection and control of industry standard NuDAM, eDAM
and ADAM modules modules using ASCII protocols.
Grounding:
Correctly wired grounds help cut down on electromagnetic interference
5 pin terminals allow a ground on the 5th pin of each block
Functional earth connection to the DIN rail
Relay:
A relay is an electrically operated switch used to control a circuit by a low-power signal giving
complete electrical isolation between the control and the controlled circuits. Relays are often
used where several circuits must be controlled by one signal.