Hardware manual

Software Configuration PCI VELOCITY / OPTO ISO RS422/485
Chapter 3 Page 32
When you have finished, click on OK. A restart message
will be displayed; to save time only restart when both ports
have been added and correctly configured.
• Repeat the above process to add the second COM port of the
PCI RS422/485, the COM base will be 0148; the IRQ value
will remain the same. After adding the remaining COM port
the COM Ports Window will look similar to the following:
Configuring The COM Ports.
• From the COM Ports window choose the port that you wish to
configure and click on Settings - the following dialogue will
be displayed: