Product manual
PX Range Product Manual Version 2.0 © Copyright Brainboxes Limited 2010 Page 9 of 37
7. The Installer will copy across all the drivers and associated registry files. Click Finish when
complete.
8. If you are installing a mulitport card, you will need to install each port manually following
steps 4-7 when prompted for each port on your card.
9. If you are installing a 422/485 card, you will also need to install the “Base System Device”.
This is the 422/485 Controller for your card. Follow steps 4-7 again when prompted.
10. Once installed, you can check the COM Number of the Port, by opening Device Manager (See
Section 3.1: Finding your Brainboxes COM port). If you need to change the COM port number,
see Section 3.2 Changing Your COM Label.