User's Manual Part 1
BL-521 r7 QSG.doc © Copyright Brainboxes Limited 2003 Page 5 of 5
HyperTerminal should now be running.
Now hit the “Enter” key once. This will activate the main menu as shown in 2.3.1 below. You will now be able to
now interact with the menus as described in the following sections.
2.3. Changing specific settings.
All Settings on the BL-521 are modified through the configuration menu. The main menu is shown below.
2.3.1. Main Menu
2.3.2. Setting the Communications Parameters
This covers options 1 from the main menu, and displays a Communications submenu as shown below.
The factory set communications parameters for your BL-521 are as follows…
Baud Rate: 115,200
Data Bits: 8
Parity: None
Stop Bits: 1
Handshaking: None