User's Manual Part 1
BL-521 r7 QSG.doc © Copyright Brainboxes Limited 2003 Page 10 of 10
You will then be prompted to enter a PIN number. Enter the Pin number (which is 00000000 – 8 zeros, unless
you have configured it to be different. Click OK
The Icon of your BL-521 in the main window should now change to indicate a “bonded” status as shown below.
3.2.3. Connect to the profile
In order to actually connect to the appropriate function on the BL-521 you will need to discover it’s services.
Simply Double-Click the device.
This will display a serial port service called “Serial 01”
Double clicking this service will create a COM port style connection to the BL-521.
The screen shot below shows that the port in our example here is listed as COM25 – your port number should be
much lower than this, but the actual value will depend on your particular machine configuration.