User's Manual

BL-521 r7 QSG.doc © Copyright Brainboxes Limited 2003 Page 6 of 6
2.3.3. Changing Baud rate.
After selecting option 1 from the “modify COMM menu”, the following baud rate menu is displayed.
Selecting 0 immediately returns you to the previous menu; selecting any other option will store the appropriate
configuration selection.
If you power down your BL-521 at this point, the configuration changes will be discarded.
Note: Configuration changes made in this menu will ONLY be applied when you select option 4 (Apply COMM
settings) on the previous menu.
2.3.4. Changing parity.
After selecting option 2 from the main menu, the following menu is displayed.
Selecting 0 immediately returns you to the previous menu; selecting any other option will store the appropriate
configuration selection.
If you power down your BL-521 at this point, the configuration changes will be discarded.