Specifications

4
INSTALLATION
These units have been designed
to be directly mounted on top of a
suitably sized and strengthened
metal duct. Fixing is by means of
self drilling screws or rivets
through the steel mount on the
bottom of unit to metal duct.
Models RPC250, RPC320,
RPC400 & RPC450 require a 550
x 550 square dropper.
RPC "Side and Top" discharge
units are required to be mounted
onto a level platform and must be
strong enough to support the unit
under operating and prevailing
conditions.
It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to
change without notice. Please consult with your dealer to confirm the specifications of the model selected.
Mounting the Cooler
Important !
Installation must be in accordance with Municipal Building Regulations,
Relevant Electrical Wiring Regulations, and any other relevant Codes and
Regulations.
All installation work to be carried out by Authorized Persons only.
RPC ROOF MOUNTED FRAME TYPE
DETAILS FOR "SIDE" & "TOP"
DISCHARGE MODELS
5
5
0
550
2
RPC ROOF MOUNTED DROPPER
DETAILS FOR DOWN DISCHARGE
MODELS.
550
550
Dropper
Flashing
Roof
1