Wi-Fi Setup Guide TM Model 7320 Universal Programmable Smart Wi-Fi Thermostat Leave this Setup Guide with thermostat.
1 Wire and Install Thermostat • Properly wire and configure thermostat. Refer to the Installer Guide. • Refer to the User Manual for programming and maintenance. NOTE: Thermostat must have 24 VAC with common “C” wire to use Wi-Fi.
2 Set-Up for Connection Before beginning setup you will need to: • Know your Wi-Fi network name and password • Have a valid e-mail address • Get the FREE app Apple® Devices: Download the BlueLink Smart ConnectTM application from the Apple® App Store AndroidTM Devices: Download the BlueLink Smart ConnectTM application from the Google Play Store Desktop Computer: Go to www.bluelinksmartconnect.com and create an account. NOTE: Your desktop PC must have a wireless connection.
3 Login and Register 3.1 Open the application or select login on the www.bluelinksmartconnect.com website. 3.2 Select REGISTER and complete the information on the registration screens. You will need a valid e-mail address to complete the registration. 3.3 Once you reach the Create Account screen, select REGISTER.
4 Enter Serial Number 4.1 Enter the thermostat serial number. You can locate this number on the back of the thermostat or on the enclosed thermostat registration card. Enter this number into the application and select ENTER. NOTE: If you removed the thermostat to locate the serial number, make sure to reconnect it before selecting ENTER. 4.2 Enter your network name (SSID) and password, select ENTER. The application will now instruct you to put the thermostat into Wi-Fi connect mode.
5 Enable Wi-Fi on Thermostat 5.1 On the thermostat, press and hold the CONFIG and DAY/TIME buttons for 3 seconds. 5.2 The display will alternate the words WIFI and SKIP and the symbol will flash. NOTE: If you are already connected to a Wi-Fi network, you will see the network name (SSID) displayed 4 characters at a time with a solid symbol. If needed, clear Wi-Fi settings and return to step 5.1 (See “Clear your Wi-Fi settings”).
6 Connect to Thermostat 6.1 Return to the application and select OK. The word WAIT will appear in the thermostat display. 6.2 The application will prompt you to go to your smartphone, tablet or computer Wi-Fi settings and select the BlueLink_WiFi network. NOTE: Do not exit the application. Minimize it so that you can return to the same screen after selecting the BlueLink_WiFi network.
7 Complete Setup 7.1 After selecting the BlueLink_WiFi network, return to the application and select OK. 7.2 Once a successful connection is made, Connection Successful will appear in the application screen and your network name will appear in the thermostat display. 7.3 At thermostat, press RETURN to exit Wi-Fi setup mode. NOTE: After setup is complete, make sure to return your device to the original wireless network.
Moving or get a new router? Clear your Wi-Fi settings. NOTE: If your thermostat was already connected to a Wi-Fi network you must first clear the Wi-Fi settings before connecting to a new Wi-Fi network. 1. Press and hold the CONFIG button for 1 second. 2. The display will change showing the first User Option. 3. Press NEXT a few times until you see the word WIFI in the display. 4. Press the up button until CL WIFI appears. 5. Press RETURN to exit and clear all Wi-Fi settings.
Record Network Information for Future Reference Network Name (SSID) Network Password Thermostat Serial Number # You may need this information later or if calling for support. Visit www.bluelinksmartconnect.com for support materials. ® Braeburn Systems LLC 2215 Cornell Avenue • Montgomery, IL 60538 Technical Assistance: www.braeburnonline.com 844-BLU-LINK (844-258-5465) (U.S.) 630-844-1968 (Outside the U.S.) ©2015 Braeburn Systems LLC • All Rights Reserved • Made in China.
