® Detailed User Manual PREMIER SERIES Programmable Thermostats 5020 For 1 Heat / 1 Cool Systems 5220 For Systems Up to 3 Heat / 2 Cool Read all instructions before proceeding. Store this manual for future reference ©2012 Braeburn Systems LLC • All Rights Reserved • Made in China.
Contents 1 About Your Thermostat Thermostat Features ................................................ 3 Thermostat and Display ........................................... 4 2 Setting User Options Advanced User Options ............................................ 8 Table of User Options ............................................... 9 Service Monitors (Filter, UV and Humidifier Pad) ........ 10 Extended Hold Time Period .....................................10 Temporary Override Adjustment Limit ............
Thermostat Display 1 About Your Thermostat 1 Room Temperature....................... .Displays the current room temperature 2 Set Temperature........................... .Displays the current set point temperature 8 7 3 BACK Indicator*............................ .BACK button is active 4 NEXT Indicator*............................ .NEXT button is active 5 Outdoor Temperature Indicator.... .
Thermostat 15 Reset Button ................................ .Resets current time, program and user settings 1 About Your Thermostat 22 INSTRUCTIONS 16 SYSTEM Button............................. .Selects the system you want to control 17 DAY/TIME Button........................... .Sets the current time and day of the week PROG Button................................. .Selects programming mode or press for 3 seconds to select SpeedSetTM BACK Button*................................ .
Table of User Options 2 Setting User Options INSTRUCTIONS Advanced User Options User options allow you to customize some of your thermostat’s features. The default user options are compatible with most applications, therefore it is not required that you adjust them. INSTRUCTIONS To access the User Options menu, press and hold the RETURN button for approximately 3 seconds until the screen changes and displays the first User Option.
Service Monitors (Filter, UV and Humidifier Pad) Temporary Override Adjustment Limit User Options 1, 2 and 3 The Temporary Override Adjustment Limit will limit how much the temperature can be adjusted from the current set point when the thermostat is used in the programmable mode. This setting will not allow the user to override the temperature past the selected limit amount of 1, 2 or 3 degrees from the current set point. When the user reaches the adjustment limit the screen will flash ADJ.
Tips Before Setting Your Program Schedule 3 Setting Your Program Schedule • Make sure your current time and day of the week are set correctly. Setting the Time and Day • When programming, make sure the AM and PM indicators are correct. 1. In normal operating mode, press the DAY/TIME button. The display will switch to the day/time setting mode and the hour will be flashing.
Energy Saving Programs This thermostat comes pre-programmed with a default energy saving program. The following tables outline the pre-programmed times and temperatures for heating and cooling in each of your 4 daily events (2 events if configured for commercial mode).
Programming a 7 Day Residential Schedule Setting Individual Days (7 Day Residential) The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule. 1. Press the PROG button. The display will switch to programming mode. M (Monday) will be displayed and the hour will be flashing. 2. Press SYSTEM to select HEAT or COOL. 3.
Programming a 5-2 Day Residential Schedule Programming a 7 Day Commercial Schedule The 5-2 day residential programming mode allows you to program Monday - Friday with one 4 event schedule and then allows you to change Saturday and Sunday with a different 4 event schedule. The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule. 1. Press the PROG button.
Setting Individual Days (7 Day Commercial) 1. Press the PROG button. The display will switch to programming mode. M (Monday) will appear and the hour will flash. 2. Press SYSTEM to select HEAT or COOL. 3. Press DAY/TIME to select an individual day. 4. Press the SpeedBar® up or down to adjust the hour for the OCCUPIED event. Press NEXT. 5. Press the SpeedBar up or down to adjust the minute for the OCCUPIED event. Press NEXT. 6. Press the SpeedBar up or down to adjust the temperature for the OCCUPIED event.
Setting the FAN Control Mode Setting the Temperature The Fan Control has 3 modes of operation – AUTO, ON, and PROG. The mode can be selected by pressing the FAN button to scroll through the different modes. Temporary Adjustment – Press the SpeedBar up or down to adjust the current set temperature. If your thermostat is running in 5-2 or 7 day programmable mode, the set temperature will change back to your original programmed settings when your next scheduled change in temperature occurs.
Status Indicators Program Event Indicators Status indicators appear in the display to let you know if your system is heating, cooling or off. HEAT ON Indicates that your heating system is running. Status Indicator COOL ON Indicates that your cooling system is running. AUX Indicates that the auxiliary stage of heating is running (multi-stage systems only). EMER Indicates that the emergency heating system is running (Model 5220 - heat pump systems only).
5 Additional Operation Features Auto Changeover Mode Adaptive Recovery Mode is a feature enabled/disabled in the Installer Settings (See Installer Manual). If enabled, the feature is automatically present while in programmable mode. Adaptive Recovery Mode tries to reach your desired heating or cooling temperature at the time you have set in your current program schedule, after a setback period.
Programmable Fan Mode Locking and Unlocking the Thermostat Programmable Fan Mode is selected by pressing FAN until PROG appears in the display. It is only available in programmable mode. Your 3-digit Lock Code is set in the “User Options” portion of this manual (See “Setting User Options”, page 8 and 11). Once the code is set, the thermostat can be locked or unlocked at any time by entering that code. Programmable Fan Mode allows the user to run the fan continuously during a selected program event.
AC Power Monitor If you entered a valid code the thermostat will be locked or unlocked (depending on its previous state). When locked, the word LOCKED appears in the display (Figure 1). If an invalid code is entered the word NO will briefly appear, indicating that an incorrect code was entered (Figure 2). The AC Power Monitor feature is enabled in the Installer Settings (See Installer Manual). If enabled, this feature will automatically be present.
Outdoor Remote Sensing 6 Thermostat Maintenance Outdoor remote sensing is enabled by installing a Braeburn® remote outdoor sensor. No additional configuration is required. Thermostat Cleaning If a Braeburn outdoor remote sensor was installed you may press the PROG and HOLD buttons at the same time to view the outdoor temperature. Changing the Batteries Never spray any liquid directly on the thermostat. Using a soft damp cloth wipe the outer body of the thermostat.
® Limited Warranty When installed by a professional contractor, this product is backed by a 5 year limited warranty. Limitations apply. For limitations, terms and conditions, you may obtain a full copy of this warranty: · Visit us online: www.braeburnonline.com/warranty · Phone us: 866.268.5599 · Write us: Braeburn Systems LLC 2215 Cornell Avenue Montgomery, IL 60538 5 YEAR LIMITED WARRANT Y Store this manual for future reference.
