® Detailed User Manual PREMIER SERIES Non-Programmable Thermostats 3020 For Systems Up to 2 Heat / 1 Cool 3220 Up to 3 Heat / 2 Cool Heat Pump Up to 2 Heat / 2 Cool Conventional Read all instructions before proceeding.
Contents 4 Additional Operation Features Auto Changeover Mode ....................................... 13 Compressor Protection ........................................ 14 Locking and Unlocking the Thermostat................. 15 AC Power Monitor ............................................... 17 Indoor Remote Sensing ....................................... 17 Outdoor Remote Sensing .................................... 18 1 About Your Thermostat Thermostat Features ...........................................
Congratulations! You are in control of one of the easiest-to-use thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control. Features • SpeedBar® Multi-Function Button simplifies programming and setting changes. • Large 4 sq. in. bright blue backlit display is easy to read. • Extra large display characters make viewing settings even easier. • User selectable service monitors remind you of required system maintenance.
1 About Your Thermostat 10 11 INSTRUCTIONS 1 12 13 14 2 3 15 16 4 5 User Manual 6 4 7 8 9
Thermostat and Display 1 Room Temperature....................... .Displays the current room temperature 2 Set Temperature........................... .Displays the current set point temperature 3 Reset Button ................................ .Resets current time, program and user settings 4 SYSTEM Button............................. .Selects the system you want to control 5 BACK Button................................. .Moves back in installer/user setup modes 6 NEXT Button............
2 Setting User Options Advanced User Options User options allow you to customize some of your thermostat’s features. Most users will not need to make any changes to the settings in this section. To enter the User Options menu, press and hold the RETURN button for approximately 3 seconds until the screen changes and displays the first User Option. Press the SpeedBar ® up or down to change the setting for the displayed User Option.
Table of User Options NOTE: A detailed description of each User Option follows this table. No. User Options Factory Default Setting Options Comments Pg. 1 Filter Service OFF OFF Monitor 30, 60, 90, 120, 180, 365 Disables filter service monitor feature. Selects a number of days that must pass before the thermostat will flash a Service Filter reminder in the display screen.
Service Monitors (Filter, UV and Humidifier Pad) User Options 1, 2 and 3 There are three user selectable service monitors that will display reminders for a required air filter, UV bulb or humidifier pad replacement. The SERVICE segment flashes in the display along with FILTER, UV or HUMID. When the service interval has been reached, and required cleaning or replacement has been performed, press the RETURN button to reset the timer. Select OFF or a set number of days before the reminder will appear.
Thermostat Lock Code User Option 5 The Thermostat Lock Code sets a 3-digit code that you may use at any time to lock or unlock the thermostat. Setting the code in the user options mode does not activate the lock feature (See Locking/Unlocking Thermostat, page 15). You may choose a 3-digit code with each digit being 0-9. 3 Operating Your Thermostat Setting the SYSTEM Control Mode The System Control has 5 modes of operation – AUTO, COOL, OFF, HEAT and EMER.
Setting the FAN Control Mode The Fan Control has 3 modes of operation – AUTO, ON and CIRC. The mode can be selected by pressing the FAN button to scroll through the different modes. NOTE: Depending on how your thermostat was configured, some fan modes may not be available. AUTO The system fan will run only when your heating or cooling system is running. ON The system fan stays on.
Setting the Temperature SpeedBar INSTRUCTIONS Temperature Adjustment – Press the SpeedBar up or down to adjust the current set temperature. ® Status Indicators Status indicators appear in the display to let you know if your system is heating, cooling or off. HEAT ON Indicates that your heating system is running. COOL ON Indicates that your cooling system is running. AUX Indicates that the auxiliary stage of heating is running (multi-stage heat pump systems only).
Resetting the Thermostat INSTRUCTIONS This thermostat provides you with a reset button that will erase all of your user settings. The reset feature does not affect the Installer Settings. To reset the thermostat, use a small object such as a tooth pick or paperclip and gently press the button located inside the small hole on the front of the thermostat housing labeled “reset”. NOTE: You cannot reset the thermostat if it is locked.
INST 4 Additional Operation Features Auto Changeover Mode Auto Changeover mode is a feature enabled/disabled in the Installer Settings (see Installer Manual). If enabled, it is selected by pressing the SYSTEM button until AUTO HEAT or AUTO COOL appears in the display. When Auto Changeover mode is enabled and selected, the system automatically switches between heating and cooling when the room temperature meets the programmed heating or cooling set points.
Compressor Protection Compressor protection is enabled/disabled in the Installer Settings (See Installer Manual). If enabled, this feature is automatically present in cooling and/or heating (heat pump only) modes. This thermostat includes an automatic compressor protection delay to avoid potential damage to your system from short cycling. This feature activates a short delay after turning off the system compressor.
Locking and Unlocking the Thermostat Your 3-digit Lock Code is set in the “User Options” portion of this manual (See “Setting User Options”, page 7 and 9). Once the code is set, the thermostat can be locked or unlocked at any time by entering that code. To lock or unlock the thermostat, press and hold the NEXT and RETURN buttons together for 5 seconds (Figure 1). The screen will change, displaying 000 and LOCK will be flashing (Figure 2).
Locking and Unlocking the Thermostat (cont.) If you entered a valid code the thermostat will be locked or unlocked (depending on its previous state). When locked, the word LOCKED appears in the display (Figure 3). If an invalid code is entered the word NO will briefly appear, indicating that an incorrect code was entered (Figure 4).
AC Power Monitor The AC Power Monitor feature is enabled in the Installer Settings (See Installer Manual). If enabled, this feature will automatically be present. If your thermostat was hardwired (power provided from the system with batteries as a backup) then the AC Power Monitor feature will indicate when a loss of power to the thermostat has occurred by displaying NO POWR.
INSTRUCTIONS Outdoor Remote Sensing Outdoor remote sensing is enabled by installing a Braeburn® remote outdoor sensor. No additional configuration is required. If a Braeburn outdoor remote sensor was installed you may press the BACK and NEXT buttons at the same time to view the outdoor temperature.
5 Thermostat Maintenance Thermostat Cleaning Never spray any liquid directly on the thermostat. Using a soft damp cloth wipe the outer body of the thermostat. Never use any abrasive cleansers to clean your thermostat. Changing the Batteries This thermostat requires two (2) properly installed “AA” alkaline batteries to provide power for the thermostat if 24 volt AC power is not connected. (See Installer Manual). + If batteries become low, a battery indicator will appear in the display.
® Limited Warranty When installed by a professional contractor, this product is backed by a 5 year limited warranty. Limitations apply. For limitations, terms and conditions, you may obtain a full copy of this warranty: • Visit us online: www.braeburnonline.com/warranty • Phone us: 866.268.5599 • Write us: Braeburn Systems LLC 2215 Cornell Avenue Montgomery, IL 60538 5 YEAR LIMITED WARRANTY Store this manual for future reference.
