User Guide

Status Indicators
Statusindicatorsappearinthedisplaytoletyouknowifyoursystemis
heating,coolingoroff.
HEAT Ifashing, indicatesthatyourheating
  systemisrunning.
COOL Ifashing,indicatesthatyourcooling
  systemisrunning.
FILT Indicatesthataservicereminderhasexpired.
  (see“ServiceFilterMonitor”,page8).
Additional status indicators (Model 2200NC Only):
AUX Indicatesthattheauxiliarystageofheatingisrunning
  (multi-stagesystemsonly)orthattheemergencyheating
  systemisrunning(heatpumpsystemsonly).
Program Event Indicators
ProgramEventIndicatorsappearinthedisplaytoletyouknowwhatpart
ofyourcurrentprogramisactive.The4differentprogrameventindicators
areMORN,DAY,EVEandNIGHT.
MORN,DAY,EVEorNIGHTwillashifatemporarysetpointchangeis
made.Theashwillstopatthenextprogramevent.
Note: MORN, DAY, EVE or NIGHT will not show while in HOLD Mode.
Resetting the Thermostat
Thisthermostatprovidesyouwitharesetbuttonthatwilleraseallofyour
usersettingsandprogramming.
Toresetthethermostat,useasmallobjectsuchasatoothpickorpaper-
clipandgentlypressthebuttonlocatedinsidethesmallholeonthefrontof
thethermostathousinglabeled“reset”.
8
Additional Operation Features
Compressor Protection
Thisthermostatincludesanautomaticcompressorprotectiondelayto
avoidpotentialdamagetoyoursystemfromshortcycling.Thisfeature
activatesashortdelayafterturningoffthesystemcompressor.
11