Product Overview

ManualsBrandsBraeburn ManualsHeating SuppliesPremier 3 Zone Control Panel (3H/2C)

The



brighter



choice

3 Zone Control Panel

for Conventional, Heat Pump or

Dual Fuel Applications (3H / 2C)

Braeburn Zone Control Panels

Featuring a compact 8”W x 10”H housing and a large 5.5

sq. in. backlit display for set-up, checkout and operation.

Quick and Easy Installation

Push-in terminal blocks lock in wires without a screw-

driver. LED’s indicate equipment and zone calls while the

display keeps you up to date with panel operation. Plus,

wire guides and a small footprint allow for a quick and

professional installation.

Product Features and Beneﬁts

• Controls up to 3 heating and 2 cooling stages

• Compatible with electric, gas, oil and

heat pump equipment–including dual fuel

• Can be used with virtually all low-voltage thermostats

and dampers from other manufacturers

• Large 5.5 sq. in. display shows system status

• Dual fuel operation with Braeburn outdoor sensor

• LED’s show all calls at a glance

• Push-in terminals for easy wiring–

no screwdriver needed

• Flexible staging controlled by panel or thermostat

• Push button set-up without dip switches

• High/Low Limit protection with optional

supply air sensor

Panel Power 6 VA maximum

System Power 100 VA maximum, 50 VA maximum per zone

Protection Electronic self resetting, current limiting

on each zone

Zone Damper Compatible with virtually all 24V powered

Control and spring dampers

Indicators LED’s for all thermostats, equipment

and dampers, LCD display for conﬁguration

Conﬁguration Conventional and Heat Pump equipment

Up to 3H / 2C

Toll-Free 866.268.5599 (U.S.) +1.630.844.1968 (Outside the U.S.) www.braeburnonline.com

Terminals Panel Power: 24V, 24C

Equipment: Rh, Rc, Y1, Y2, G, G2, W1/E/AUX,

W2/O/B, L, C

Thermostats (3 each): R, Y1, Y2, W1/E/AUX,

W2/O/B, G, L, C

Dampers (3 each): PO, C, PC

Supply Air Inputs: SA1, SA2

Outdoor Air Inputs: ODT1, ODT2

Speciﬁcations

PREMIER SERIES

140332

Summary of content (2 pages)

PAGE 1
3 Zone Control Panel for Conventional, Heat Pump or Dual Fuel Applications (3H / 2C) 140332 Braeburn Zone Control Panels Featuring a compact 8”W x 10”H housing and a large 5.5 sq. in. backlit display for set-up, checkout and operation. Quick and Easy Installation Push-in terminal blocks lock in wires without a screwdriver. LED’s indicate equipment and zone calls while the display keeps you up to date with panel operation.
PAGE 2
3 Zone Control Panel 140332 for Conventional, Heat Pump or Dual Fuel Applications (3H / 2C) Architectural Specifications The fully automatic zone panel shall be Braeburn model number 140332, 8.0”W x 10.2”H x 2.1”D, powered from 24 Volts AC. In the event of a power failure, the unit shall retain all configuration settings. The zone panel shall be compatible with low voltage mechanical or electronic thermostats and be capable of controlling up to three stages of heating and two stages of cooling.