User`s guide

T12: Creating a Legend List, Component Markers
Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Labels to be printed:
PANEL1
PANEL1A
PANEL2
Setup Status:
Center
H Justify
Center
V Justify
0 Degrees
Rotation
Component
Format
Text
Legend Type
1. Press <List>.
2. Press the <▼> key once to select Create, then press <Enter>.
3. When “Enter List Name” prompt appears, enter LIST1, then press <Enter>.
4. When “Enter Part No.” prompt appears, enter PTL-19-423, then press <Enter>.
5. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default
value of 9.
6. Enter PANEL1 on line one.
7. Press <Func> + <Save>.
8. Press <Shift> + <Legend Clear>.
9. Enter PANEL1A on line one.
10. Press <Func> + <Save>.
50 TLS2200
™
Thermal Transfer Printer User Manual