User`s manual

TLS PC Link
TM
Programmer’s Guide
53
Appendix D: List of Commands
The following table lists all of the commands found in the guide, along with their
description. Refer to the page number listed to the right for detailed information
on each command.
Description Command Page
Reset SOH # 7
Send ASCII Status String SOH A 8
Toggle Pause SOH B 9
Cancel SOH C 10
Disable SOH SOH D 10
Send Batch Quantity SOH E 10
Disable Feedback Characters STX A 12
Enable Feedback Characters STX a 12
Enter Heat Setting Offset STX b 13
Disable Feeding to Cut Position after
Print
STX C 13
Enable Feeding to Cut Position after
Print and Perform a Feed to Cut
STX c 14
Set Quantity for Stored Label STX E 14
Form Feed STX F 15
Set Form Stop Position STX f 15
Print Last Label Format STX G 16
Enable SOH Commands STX H 16
Input Image Data STX I 17
Extended System Commands STX K 18
Enter Label Formatting Command STX L 18
Set Printer to Metric STX m 18
Set Printer to Inches STX n 19
Set Start of Print Offset STX O 19