User guide

Bradyprinter THT MVPplus Quick Reference Guide
Front Panel
English 13293LB-12 Rev. 2 16Nov2004 EN-11
PLUS (+) Press (+) to:
• scroll to the next selection
• increase the value
• answer “yes”
• print a label (when applicable)
MINUS (–) Press (–) to:
• return to the previous selection
• decrease the value
• select the digit you wish to change
• answer “no”
Table 2 • Front Panel Buttons (Continued)
Front Panel Buttons Description
Table 3 • Front Panel LEDs
Front Panel LEDs Description
POWER POWER is on when the printer is turned on.
PAUSE When on, the printer has stopped all printing operations. If the printer is
printing when a pause is requested, the LED turns on at the end of the current
label.
In Peel-Off Mode, the PAUSE LED blinks when the label is available for
removal.
Note • No printing occurs when the printer is in Peel-Off Mode and the
peel-off option is not installed.
ERROR The ERROR LED is normally off. When an error occurs that causes an
interruption in the printing process, the LED acts as follows:
• SLOW BLINK — “RIBBON IN” warning, “UNDER TEMP” warning, or
“OVER TEMP” error
• FAST BLINK — “PRINTHEAD OPEN” error
• LED ON — “MEDIA OUT,” “RIBBON OUT,” or “CUTTER” errors
The error is displayed on the liquid crystal display (LCD).
DATA The DATA LED is normally off. When data is received, the LED acts as
follows:
• SLOW BLINK — The printer is unable to accept more data from the host.
• FAST BLINK — The printer is receiving data.
• LED ON — No data is being received. Data processing or printing is still
occurring.
The DATA LED blinks once when CANCEL is pressed and a format is
successfully canceled.