Specifications

3-20 Label Design
)ROORZWKHVHVWHSVWRIUDPHDODEHORUDQDUHDRQDODEHO
1) Display the label or area you want to frame and press the Frame key.
7KH)UDPH2SWLRQVZLQGRZGLVSOD\V
2) Press the ↑ or ↓ key to move the cursor to an option you want to set. Then press
the
← or → key to select a value as shown in the following table.
Frame option What it does
Label Controls whether a frame prints for the current label and whether
the frame from the previous label will be used for the current
label. Choose Off (default), On or Use previous.
Label line width Sets the line width for the label frame. Choose Thin (default),
Medium or Wide.
Label frame color Sets the color for the label frame. The default is the first color
value stored in the memory cell of the installed ribbon, or black if
no ribbon is installed.
• If either a paneled ribbon or continuous color monochrome
ribbon is installed, you can choose from the entire color
palette. The colors available on that ribbon are listed first, and
are identified by asterisks around the color name, as shown on
the Frame Options window example above. When you print,
you will be prompted when you need to install a different color
ribbon. You can cycle through the color list.
• If a monochrome ribbon is installed, the color of the installed
ribbon is displayed, but you cannot change the color setting.
• If no ribbon is installed, when you turned on the system you
were asked to choose whether you wanted to create labels
based on a paneled or monochrome ribbon type. If you chose
Paneled, you are prompted to also choose the paneled ribbon
colors you wanted to use; those colors are available for
selection. If you chose monochrome, see the information in the
previous paragraph.
For more information, see “How installed ribbons affect label
composition” on page 2-6.
Label: Off
Label line width: Thin
Label frame color: Black
Label frame shape: Rectangle
Frame Options
Press ↑↓←→, ENTER or ESC