Specifications

Setting up and using the printer control utility 6-11

Field/Button What it does
Get status Displays the Printer Status dialog box, which lists current
labeling system information. This includes tape information
(color, width, amount remaining and type), ribbon information
(colors and width) and operating system version number.
Details are provided for information only, and values cannot be
changed here. Click OK to close the dialog box.
Cut Advances the supply 2.25 inches (57.12 mm), cuts and
retracts it. This function ignores the Leader/Trailer Length
value set on the labeling system.
Density Lets you adjust the print density by increasing or decreasing
the thermal print energy. Drag the slider to the right if you are
seeing incomplete characters, poorly filled text or a poor
leading edge line. Drag the slider to the left if the ribbon is
bonding to the tape.
Unit of measure Sets the unit of measure for displaying label length or other
length values (such as amount of tape remaining). Choose
inches or millimeters, then click the Apply button.
Language Sets the language in which labeling system menus, prompts
and messages display. (Note that this setting does not affect
the text in the utility itself.) Choose a language, then click the
Apply button.