Service manual

58 Printer Applicator System PAM 3600
Service Manual PAM 36005 Adjustments
Setting the Speed of the Printhead Movement
The speed of the printhead movement can be set via two valves. Those valves regulate the speed of the
compressed air.
LIFT
CYL.
VACUUM
BLOW-
AIR
BRAKE
TABLE
SUPPORT
AIR
PRINT
HEAD
ROTATE
CYL.
2 31
Figure 5n Setting the speed of the printhead movement
1 Valve for upward movement
2 Valve for downward movement
3 Valve key printhead
Remove the cover.
Turn one of the valves (1, 2) to regulate the speed.
Turning clockwise will close the valves.
A wider opening of the top valve (1) speeds up the printhead moving upward.
A wider opening of the bottom valve (2) accelerates the downward movement.
3. Check the speed by releasing a movement of the printhead. For that purpose press the integrated key (3) on
the concerning valve.
4. If the setting is correct mount the cover.
1.
2.
-
-