Service manual

47Printer Applicator System PAM 3600
Service Manual PAM 3600 4 Replacing Assembly Units
4.13 Disassembling the Energy-Chains
If a cable contained in the energy-chains is to be changed, proceed as follows:
2 31
Figure 4y Disassembling the energy-chains
1 2 screws
2 Holder
3 First track link
Loosen the two screws (1) of one of the holders (2) and take the chains from the holder.
Zip the outer side of the chains open by pulling out the rst track link (3).
Change the respective cable and reassemble the chains in reverse order.
1.
2.
3.