Service manual

45Printer Applicator System PAM 3600

Service Manual PAM 3600 4 Replacing Assembly Units

Switch paper end

BLOW-

AIR

VACUUM

LIFT

CYL.

BRAKE

TABLE

SUPPORT

AIR

HEAD

ROTATE

CYL.

20 2221 23

Figure 4v Replacing switch paper end

20 Switch paper end

21 3 screws

22 Plate

23 Screw

Remove label stock and transfer ribbon from the printer.

Remove the cover.

Remove the ange and the adapter from the media supply hub.

Remove the three screws (21) and the plate (22) from the media supply hub.

Remove the two screws of the micro switch paper end (20).

Pull out the concerning plug (g. 4q, 4) on the applicator control PCB (g. 4q, 3).

Remove the four screws (23), move the manifold assembly with the concerning PCB and pull out the plug (g.

4q, 4) through the hole in the mounting plate.

Mount all components in reverse order.