Service manual

31Printer Applicator System PAM 3600
Service Manual PAM 3600 4 Replacing Assembly Units
9
10 11
138 12 14
Figure 4e Replacing the pinch roller
8 Transport locking roller
9 Spring
10 Knurled knob
11 Bearing plate
12 4 screws
13 Pinch roller
14 Guide roller
8. Hang out the spring (9).
NOTICE!
Pay attention on the spring on the other side of the transport locking roller (8), do not hang out it
by moving the roller or the knurled knob.
9. Loosen and remove the four screws (12) on the bearing plate (11).
10. Remove the bearing plate (11).
11. Replace the pinch roller (13).
12. Mount the bearing plate, consider here to thread the guide roller (14).
13. Lock the transport locking roller by pressing the knurled knob (10) upward.
14. Hang up the spring (9).
15. Mount the other components in reverse order.