Service manual

29Printer Applicator System PAM 3600

Service Manual PAM 3600 4 Replacing Assembly Units

4.4 Replacing the Transport Locking Roller

WARNING!

Mortal danger by electric shock!

Disconnect power supply!

Switch off compressed air!

1 2 3

Figure 4c Replacing the transport locking roller

1 Transport locking roller

2 E-ring

3 Knurled knob

Remove label stock and transfer ribbon from the printer.

Remove the two E-rings (2) from the axle.

Unlock the transport locking roller (1) by pressing the knurled knob (3) downward.

Pull out the knurled knob (3) with the axle.

Remove the transport locking roller (1) and replace it.

Mount the components in reverse order.