Service manual

26 Printer Applicator System PAM 3600

Service Manual PAM 36004 Replacing Assembly Units

4 Replacing Assembly Units

4.1 Recommended Tools

The following tools are recommended for servicing the PAM 3600 Printer-Applicator-System:

Standard Tools

double open-end wrench 4x5

double open-end wrench 5,5x7

double open-end wrench 8x9

double open-end wrench 10x13

double open-end wrench 12x14

double open-end wrench 14x17

allen key 1,5; angular

allen key 1,25; angular

allen key 2; angular

allen key 2,2; angular

allen key 3; angular

allen key 4; angular

allen key 5; angular

norm allen key 2,5; with hilt

precision allen key size 0

Philipps screw-driver size 1

Philipps screw-driver size 2

socket wrench 4,5

socket wrench 7

snap ring pliers

at pliers

Torx TX 20

Special Tools

allen key 0.9 with long hilt (cab part number: 5945114)

spring hook (cab part number: 5906109)

spring scale 5 N (cab part number: 5909017)

spring scale 25 N (cab part number: 5909018)

spring scale 10 N (cab part number: 5906108)

test collar (cab part number: 5534199)

manometer (cab part number: 5538317)

tube loosener (manufacturer: SMC; SMC part number: TG-1)