Service manual

24 Printer Applicator System PAM 3600

Service Manual PAM 36003 Maintenance

3.4 Cleaning the Brake

It is recommended to clean the brake regularly. Otherwise it is possible that the transport of the paper is adversely

affected.

WARNING!

Mortal danger by electric shock!

Disconnect power supply!

Switch off compressed air!

1 2 3

Figure 3c Cleaning the brake

1 Brake

2 Screw

3 Brake plate

Remove label stock and transfer ribbon from the printer.

Loosen the screw (2).

Remove the brake plate (3).

Using a soft brush or a vacuum cleaner, wipe off any accumulated dirt from the area around the brake (1).

Remount the brake plate (3) and tighten the screw (2).