Installation guide

Brady Network Card Installation

Networks Supported

Brady Netwwork Card Installation Guide

Brady Network Card Installation

If your Brady printer is equipped with a Brady Network Card (WiFi or Ethernet), you can configure the printer

to run as a local printer (physically attached to your PC via a USB cable) and as a network (shared) printer

through Ethernet or WiFi. To establish the printer as a network printer, you must configure the Brady Network

Card to recognize and work with your networks. The Brady Printer Drivers CD, packaged with your printer,

contains the installation wizards not only for printer drivers but also for the Brady Network Card configuration.

The printer drivers and Brady Network Card drivers can also be downloaded from the Brady website at

www.bradyid.com

The network card installation and configuration wizard identifies six different installation scenarios. They are:

• First time installation for WiFi printing

• First time installation for Ethernet printing

• Bluetooth printing from mobile phones

• Installation for additional PC’s

• Installing the USB driver only

• First time installation for Adhoc printing