Installation guide

Brady Network Card Configuration Utility
Bluetooth Settings
48
Brady Network Card Installation Guide
Bluetooth Settings
The Bluetooth Settings tab displays the generic device name of the Bluetooth configuration installed in your
printer. The default name is Brady. You can change the default name and PIN on this tab.
1. Click the down arrow in the Mode field
to select the mode of operation of your
Bluetooth connection.
Modes
Public - The Brady Network Card can be
discovered and connected to by any
Bluetooth device.
Private - The Brady Network Card cannot
be discovered by new Bluetooth devices but
it can be connected.
Off - The Brady Network Card cannot
be discovered or connected.
A PIN is required for Bluetooth connection.
The default PIN is 0000. If you wish to
change the PIN:
1. Click Change Pin button.
2. In the New PIN: field, enter the new
PIN.
3. In the Confirm PIN: field, re-enter the
new PIN.
4. Click OK to accept the new PIN and
return to the Bluetooth Settings tab.
5. Click OK again to accept changes and
exit the dialog box.