Installation guide

Brady Network Card

Brady Network Card LED Light

Brady Netwwork Card Installation Guide

Brady Network Card

Brady Network Card LED Light

The changing colors of the LED light on the Brady Network Card signifies the following:

Color Status

Solid Green Card is functioning normally, status is OK.

Blinking Orange The firmware is corrupted and it needs to be upgraded. Use the

Brady Network Card Configuration Utility to upgrade the firmware.

(See page 49 for information on downloading new firmware.)

Blinking Green Firmware upgrade is in progress.

Solid Red Card failure. There is no communication between the Brady Network

Card and the printer. Contact your system administrator.

Blinking Red An error is detected in the current operation of the Brady Network

Card. Check the current operation.