Installation guide

Troubleshooting
Ethernet Connection Failed
38
Brady Network Card Installation Guide
Troubleshooting
Ethernet Connection Failed
If Ethernet connection fails, an error
message displays.
The Ethernet connection could have failed
due to the PC and printer not being on the
same network.
1. Click Back.
2. Verify that your printer and PC are
connected to the same network. (Refer
to the connection diagram on page 16.)
3. Click Next to continue with installation.
Note: If the same network has
been selected and the
connection still fails, your PC
and printer may be on different
subnets, or a firewall is
blocking the connection. In this
case, contact your network
administrator.