Installation guide

Brady Network Card Installation
First Time Installation for Ethernet Printing
16
Brady Network Card Installation Guide
13. In the Printer Description field, enter
an easy-to-identify name/description
for this network connection. You can
use any alphanumeric characters.
In the Network Address Type field, the
default DHCP protocol is recommended. If
you choose Static, the IP Address, Subnet
Mask and Default Gateway fields are
required.
14. Click Next.
15. Verify that your printer and PC are connected to the same network. When verified, click Next.
To verify that your printer and PC are on the same network, refer to the connection guidelines below.
Figure 1 • Network connections