User`s manual

NetDoc™ User’s Manual 1-93 Rev B
Setting Up the Cabling Infrastructure
6. In the Outlet Connector Type group box, enter the following:
• # of Positions
• PIN Config.
• Term. Type
• Manufacturer
•Part #
•Port Color
7. Enter the Contact and Connected Asset data.
Note: The Location frame is automatically populated from the Navigation Tree.
8. In the Backbone Connection frame, enter the Asset Name, PBX/Switch Port and
Extension. If shown, you can also enter the Mainframe PU (Physical Unit) and LU (Logical
Unit) information. This only displays if you selected the type Data.
9. In the Key Sheet, (only displays if you selected Voice type), (see “Editing the Key Sheet”
on page 1-102.
Figure 1. Horizontal Links - Data