User`s manual

NetDoc™ User’s Manual 1-85 Rev B
Setting Up the Cabling Infrastructure
Editing Port/Position Status
The Port/Position Details tab shows the availability status of each Port or Position on the
termination hardware. For example, when a Port/ Position is connected to a backbone cable,
its status changes from “Available” to “Used.”
If a Port or Position becomes damaged, you can
edit it directly.
The table is populated with the following information for each Port/Position:
• Cable Type : Backbone
•
Cable ID : Cable ID designation
•
Backbone Pairs/Strands : Indicates the numbers of pairs or strands used
•
Status : Indicates the status of the port/position (e.g., available, used, damaged)
To change the status of a port or position:
1. In the Details pane, click the Port/Position tab.
2. In the Status column, from the drop-down list, choose a status of the Port/Position.
3. Click Save.