User`s manual

1-84 Rev B NetDoc™ User’s Manual
Setting Up the Cabling Infrastructure
9. Enter a Start and End Port/Position value. The Number of Port/Positions field
automatically populate (e.g., if you enter "1" for Start and "50" for End, the value in
Number of Port/Positions will be 50).
Note: Start and End Port/Position lists the number of physical connections that exist in a
specific piece of termination hardware. For patch panels, ports are designated; for wiring
blocks, positions are designated. These physical connections must be in place before you
can connect anything to the termination hardware.