User`s manual

NetDoc™ User’s Manual 1-83 Rev B
Setting Up the Cabling Infrastructure
To add termination hardware:
Note: ID, Termination Type, and the Start and End Port/Positions are the only required
fields needed to add Termination Hardware.
1. On the Main Page, click Launch Application.
2. On the Navigation Tree, highlight the Telecommunication Space where you want to add
termination hardware.
3. In the List View drop-down field, select Termination Hardware. The Termination
Hardware window displays.
4. In the List View, click Add.
5. Enter the ID designation—a unique value by which you will identify this piece of
termination hardware.
6. From the drop-down list, select a Termination Type.
7. In the Cross Connect Hardware Type frame, enter information for the following:
• PIN Config
• Cat. Rating
• Term Type
• Manufacturer
•Part #
8. From the drop-down list, select a Color Code ID.
Note: Color Code ID is optional to describe the hardware type that can be cross-connected.