User`s manual

1-82 Rev B NetDoc™ User’s Manual
Setting Up the Cabling Infrastructure
Termination Hardware
Termination hardware is easily set up and NetDoc™ makes it simple to locate termination
hardware when you need to move cabling; it is also easy to track ports/positions and how
each is being used. Before adding Termination Hardware, you must set up the space where it
resides (see “Set Up Indoor Spaces” on page 1-71 for instructions).
Place Termination Hardware in an appropriate Telecommunication Space such as:
Consolidation Point, Entrance Room, Handhole, Manhole, Termination Closet, Closet Point or
Utility Pole.
Typical termination hardware can include:
Note: Termination hardware must be in place before backbone or asset hardware can be
connected or linked. (See “Termination Hardware ” on page 1-82.)
• Termination Point • Mechanical Room
• Consolidation Point • Office Space
• Termination Closet • PIN 1
• Manhole • Relay Rack
• Handhole • Station Location
• Equipment Room • Telecommunication Room
• MDF • Termination Shelf
• TJB • Underground Duct