User`s manual

1-80 Rev B NetDoc™ User’s Manual
Setting Up the Cabling Infrastructure
Faceplate Ports
Each faceplate can have one or more ports associated with it.
To add a faceplate port:
1. On the Main Page, select Infrastructure.
2. In the Navigation Tree, click to highlight the name of the faceplate where you want to add
a port. The Faceplate Info screen displays with the Faceplate name and any existing ports
listed in the table.
3. In the Faceplate Info screen, click Add.
4. Enter the name of the port in the table.
5. (Optional) In the Notes section, add a note for this company.
6. (Optional) To insert an attachment:
a. In the Attachments area, click add and browse to the location of your attachment, then
click Open.
b. If desired, enter a note for the attachment.
c. Click OK.
7. Repeat Steps 3 and 4 to add additional ports to this faceplate.
8. Click Save to save the faceplate port information.
Note: The faceplate port information is displayed in the Detail View when you click the
faceplate icon in the Navigation Tree.