User`s manual

1-78 Rev B NetDoc™ User’s Manual
Setting Up the Cabling Infrastructure
Setting Up the Cabling Infrastructure
After setting up your geographical infrastructure, the next step is to set up the cabling.
Although many elements of cabling infrastructure can be added at any time after the
geographical infrastructure is set up, faceplates and termination hardware should be set up
first. Faceplates are usually attached to a Work Area while Termination Hardware is usually
located in a Telecommunication Space.
Faceplates
Any indoor or outdoor space may have a faceplate set up in NetDoc™. Faceplates are added
at the Floor (or space) level in the Navigation Tree.
Note: Faceplates can also be set up when you are adding a Work Area.
To add a Faceplate:
1. On the Main Page, select Infrastructure.
2. In the Navigation Tree, click to highlight the name of the space where you want to add a
faceplate. The Space Info screen appears with the space name.
3. In the Space Info window, click Add and type the faceplate name or ID.
4. In the Notes section, add a note for this company, if desired.
5. To insert an attachment:
a. In the Attachments area, click add and browse to the location of your attachment, then
click Open.
b. If desired, enter a note for the attachment, then click OK.
6. Click Save. The new faceplate will be added to the Navigation Tree.