User`s manual

1-66 Rev B NetDoc™ User’s Manual
Setting Up the Geographical Infrastructure
Set up a Building
Each campus you set up must contain at least one building. The building will contain the
spaces that house the components of your infrastructure. Your company may have one
building, or multiple buildings that can be interconnected by cabling components. Buildings
are added at the Campus level of the Navigation Tree.
To add a building:
1. On the Main Page, select Infrastructure.
2. Highlight the Campus where you want to add buildings. The Campus Info window displays
with the Campus and Location displayed in the Attributes section.
3. Click the radio button for Building.
4. Click Add.
5. Enter the Name and Location of the building.
6. Repeat Steps 4 and 5 for each additional Building.
7. In the Notes section, add a note for this company, if desired.
8. To insert an attachment:
a. In the Attachments area, click add and browse to the location of your attachment, then
click Open.
b. If desired, enter a note for the attachment.
c. Click OK.
9. When finished, click Save.
10. When finished, click Save. The new building entries will display under the campus.
Note: The Navigation Tree, will show a plus sign next to the icon indicating there is
infrastructure information at the next level down. Click plus (+) to expand and view that
information.