User`s manual

1-42 Rev B NetDoc™ User’s Manual
Working with Menus
Importing Tester Data
1. From the Main Page, click Import Tester Data. Numbered steps will display.
• Step 1 - S elect space location: Click Set Location to browse through the Navigation
Tree
and select the location to which the results should be associated. Once you choose
the location, click
Accept . The Space field is automatically populated.
Note: This step is needed for both Horizontal and Backbone Cable test results.
• 1a - Select Backbone Cable (optional): From the Select Backbone Cable drop-down
menu, select the Backbone Cable needed.
Note: This step is only needed if importing test results for a Backbone Cable.
• Step 2 - Select data file to import: In the Select data file to import area, click Browse
and navigate to CSV file you want imported, then click
Open .
Note: If your test results have leading and trailing quotes – remove them by selecting the
check box below the Step 2 field before opening the results for loading. The word
"Loading..." will display at the bottom of the screen. Your test results should appear within
seconds as the system processes the imported file.
• Step 3 - Select tester this file was imported from: Click Add/Remove . In the
Add/Remove window, build your tester manufacturer. When complete, click
Close and
make sure the appropriate name appears in the Step 3 field.
•
Step 4 - Select or Name the Profile Map: Skip this step.
•
Step 5 – Add/Remove Column Headers for Data Grid: Click Add/Remove , then in the
All Fields window, highlight the column headers you want to keep for the final import into
the database. Click the arrows to move the highlighted headers to the right or left side of
the pop-up window. These selections will appear in the expanded Import screen table.
2. In the Import screen table, click the drop-down menu and select the header you just
created.
Note: Data in columns without a header will not be imported. This ensures your file will only
contain the information you specify for your final import.
3. Click Save Profile, enter a profile name, then click Save. Your profile name will display in
the field
Select or Name the Profile Map.
4. Click Import.
5. In the pop-up window, type in a (set) Name, Tested By name, and any other notes for this
test set.
6. Click Import again. The file will begin the process of importing into the selected location.
7. Click OK when the message displays indicating the import was successful.