User`s manual

NetDoc™ User’s Manual 1-37 Rev B
Working with Menus
Load LABELMARK™ Settings
The Load Settings feature lets you browse to a previously-saved label file and load those
settings.
To load settings:
1. From the Main Page, click Export to LabelMark.
2. In the export window, click Load Settings.
3. Click Browse.
4. Browse to the location of your previously-saved export file, then click Open.
5. Click OK to load the settings.
Note: You can also use previously-saved settings to create a new label file with a new
location, but with the same settings. Load the saved label file, change the location, and
save the file with a new name.
Save LABELMARK™ Settings
The Save Settings feature lets you save your label settings to a file that can be used later.
To save settings:
1. From the Main Page, click Export to LabelMark.
2. Complete the steps to “Export to Brady LABELMARK™” on page 1-34
.
3. When the setup is complete, click Save Settings.
4. In the File Download window, click Save.
5. Browse to the location where you want the file saved, then click Save.