User`s manual

NetDoc™ User’s Manual 1-115 Rev B
Setting Up the Cabling Infrastructure
Adding a Conductor
You can add a conductor after adding appropriate busbars for the highlighted space.
To add a conductor:
1. On the Navigation Tree, highlight the Space that contains the grounding busbar.
2. In the List View pane drop-down list, choose Grounding.
3. Click the Conductors radio button and then Add.
4. In the Conductor Info tab, enter the Conductor ID.
5. From the Conductor Type drop-down list, select a conductor type. The Building, Floor,
and Space are populated with your location in the Source box.
6. Next to the Busbar ID field, click .
7. In the Select Item window, select a busbar located in that space, then click OK.
8. In the Destination box, click Set Location.
9. Choose a destination location then click Accept. The destination Building, Floor, and
Space are populated.
10. From the Dest. Type drop-down list, select the destination type. and complete the
appropriate fields (the options change depending on which destination type you selected):
• Asset: Asset ID , Type , and Name fields appear in the Destination box. Click the button
next to
Asset ID . In the Select Item window, select Asset ID and click OK . The Type and
Name fields populate.
•
Backbone: Backbone ID and Type fields appear. Click the button next to Backbone ID . In
the
Select Item window, select the Backbone ID and click OK . The Backbone ID and
Type fields populate.
•
Busbar: Busbar ID and Type fields appear. Click the button next to the Busbar ID field. In
the
Select Item window, select the Busbar ID and click OK . Busbar ID and Type fields
populate.
•
Pathway: Pathway ID and Type fields appear. Click the button next to the Pathway ID field.
In the
Select Item window, select the Pathway and click OK .
•
Term HW: Term HW ID and Type fields appear. Click the button next to the Term HW ID
field. In the Select Item window, select the Term HW ID and click OK . The Type field
populates.