User`s manual

NetDoc™ User’s Manual 1-101 Rev B
Setting Up the Cabling Infrastructure
Identifying Horizontal Link Pathways Used
You must establish Pathways before you can identify the pathways used in horizontal links
(see “Adding a Pathway” on page 1-120.
To identify pathways used:
1. On the Horizontal Link, click the Pathways Used tab.
2. In the Detail area, click Add.
3. In the Select Location window, select the Pathway that will be used by the Horizontal Link.
4. Click Accept. The Pathway information populates the form.
5. Click Save.