User`s manual

1-96 Rev B NetDoc™ User’s Manual
Setting Up the Cabling Infrastructure
Connecting Horizontal Links
Connecting Contacts to a Horizontal Link
Only basic information in the Horizontal Link type frame is required for you to continue setting
up a Horizontal Link. You may, however, select users associated with this link.
To connect a contact:
1. In the Contact section, click . The Select Contact window displays with all users
associated with the selected Horizontal Space.
2. To quickly sort through the list, click the column heading.
3. To connect to a contact not currently located in the same space, or to locate a user, click
Set Location.
4. Locate and select the user, then click OK to close the navigation window.
5. Click OK to close the Contact window and add the selected user as a contact.
To disconnect a contact from the horizontal link:
1. In the Horizontal Links window, click next to the Contact name.
2. Click OK when asked if you want to disconnect the contact from this horizontal link. The
contact will be removed from this horizontal link.