Datasheet

ManualsBrandsBrady ManualsLabel Printer ConsumablesLabel Tape, Polyester, 7.62m x 12mm, White

BRADY B-422 THERMAL TRANSFER PRINTABLE GLOSSY WHITE

POLYESTER LABEL STOCK

TDS No. B-422

Effective Date: 2012-06-27

Description:

GENERAL

Print Technology: Thermal transfer

Materials Type: White polyester

Finish: Glossy white

Adhesive: Permanent acrylic

APPLICATIONS

Electronic PCB and component identification, bar code label and rating plates and solar panel identification.

RECOMMENDED RIBBONS

Brady series R6000

Brady series R6000 Halogen Free (previously known as R6000HF)

Brady series R4400 (colors - red, blue, green, white)

Brady series R4900 (alternate)

AGENCY APPROVALS

UL: B-422 is a UL Recognized Component to UL969 Labeling and Marking Standard when printed with Brady Series

R6000 and R6000 Halogen Free ribbons. See UL file MH17154 for specific details. UL information can be accessed

on line at UL.com. Search in Certifications area. The Brady Series R4900 ribbon is also UL approved.

CSA: B-422 is CSA Accepted to C22.2 No.0.15-95 Adhesive Labels Standard when printed with Brady Series R6000

ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa-

international.org.

Brady B-422 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

SPECIAL FEATURES

B-422 is designed to withstand exposure to numerous solvents and exhibits good adhesion to many surfaces

including low surface energy plastics.

B-422 is UL Recognized for Outdoor Use on glass, thermoset polyester plastic and polyvinyl fluoride plastic surfaces

to support solar panel identification applications.

Summary of content (4 pages)

PAGE 1
BRADY B-422 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK TDS No. B-422 Effective Date: 2012-06-27 Description: GENERAL Print Technology: Thermal transfer Materials Type: White polyester Finish: Glossy white Adhesive: Permanent acrylic APPLICATIONS Electronic PCB and component identification, bar code label and rating plates and solar panel identification.
PAGE 2
Details: PHYSICAL PROPERTIES Thickness TEST METHODS ASTM D 1000 -Substrate -Adhesive -Total ASTM D 1000 20 minute dwell 24 hour dwell 47 oz/inch (51 N/100 mm) 55 oz/inch (60 N/100 mm) -Textured ABS 20 minute dwell 24 hour dwell 30 oz/inch (33 N/100 mm) 35 oz/inch (38 N/100 mm) -Polypropylene 20 minute dwell 24 hour dwell 47 oz/inch (51 N/100 mm) 51 oz/inch (55 N/100 mm) -Enamel Painted Metal 20 minute dwell 24 hour dwell 54 oz/inch (59 N/100 mm) 61 oz/inch (67 N/100 mm) -Powder Coated Metal 20
PAGE 3
PERFORMANCE PROPERTY CHEMICAL RESISTANCE Samples printed with Series R4900, R6000 and R6000 Halogen Free ribbons. Samples laminated to aluminum panels and allowed to dwell 24 hours prior to testing. Test conducted at room temperature. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.
PAGE 4
Trademarks: Alconox® is a registered trademark of Alconox Co. BIOACT® is a registered trademark of Petroferm, Inc. BradyPrinter™ is a trademark of Brady Worldwide, Inc. EC-7R™ is a trademark of Petroferm Inc. Freon® is a registered trademark of Du Pont de Nemours, E.I. and Company Polyken™ is a trademark of Testing Machines Inc.