Datasheet
SAE 20 Oil
NE
NE
NE
10% Sodium Chloride
NE
NE
NE
Alconox®
NE
NE
NE
Deionized Water
NE
NE
NE
NE = No Effect
NT = Not Tested
F = Failed (affected sample)
7 Day Immersion: Immersed in reagent for 7 days.
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.
Rub Test: Rubbed sample for 1 minute with swab soaked in reagent.
Shelf Life and Fitness for Use: Product testing, customer feedback, and history of similar products, support a customer performance
expectation of one year from the date of receipt for this product as long as this product is stored in its original packaging in an
environment below 80°F (27°C) and 60% RH. However, it remains the responsibility of the user to assess the risk of using such
product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual
applications.
Trademarks:
ANSI: American National Standards Institute (U.S.A.)
ASTM: American Society for Testing and Materials (U.S.A)
Alconox® is a registered trademark of Alconox Co.
BBP® 31 is a registered trademark of Brady Worldwide, Inc.
BMP® 21 is a registered trademark of Brady Worldwide, Inc.
BMP® 71 is a registered trademark of Brady Worldwide, Inc.
Fed. Spec.: United States Federal Specification (U.S.A.)
GlobalMark
TM
Industrial Label Maker is a trademark of Brady Worldwide, Inc.
HandiMark® is a registered trademark of Brady Worldwide, Inc.
IDXPERT
TM
is a trademark of Brady Worldwide, Inc.
Labelizer® is a registered trademark of Brady Worldwide, Inc.
MINIMARK
TM
is a trademark of Brady Worldwide, Inc.
PSTC: Pressure Sensitive Tape Council (U.S.A.)
Powermark
TM
is a trademark of Brady Worldwide, Inc.
SAE: Society of Automotive Engineers (U.S.A.)
VersaPrinter
TM
is a trademark of Brady Worldwide, Inc.
Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady
customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop
specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture
this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory.
As such, Brady makes no independent representation or warranties, express or implied, and assumes no liability in connection with
the use of this information.
WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their
adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and
workmanship, but limits its obligations under this warranty to replacement of the product shown to Brady’s satisfaction to have been
defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This
warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or
fitness for a particular purpose, and any other obligations or liability on Brady’s part. Under no circumstances will Brady be liable for
any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady’s
products.
Copyright 2017 Brady Worldwide, Inc.│ All Rights Reserved
Material may not be reproduced or distributed in any form without written permission
________________________________________________________________________________________________________