Specification

ManualsBrandsBrady ManualsLabel Maker TapesBMP21 Series Label Cartridge 0.5 in. W x 21 ft. L B430 Polyester Cartridge, White on Clear Labels

Technical Data Sheet

BRADYBONDZ™ B -430 THERMAL TRANSFER PRINTABLE GLOSSY CLEAR POLYESTER LABEL STOCK

TDS No. B -430

Effective Date: 10/05/2022

Description:

GENERAL

Print Technology: Thermal transfer

Materials Type: Clear polyester

Finish: Glossy

Adhesive: Permanent acrylic

APPLICATIONS

Rating and serial plates using alphanumerics, barcodes, graphic symbols and logos that require name plate quality.

RECOMMENDED RIBBONS

Brady Series R6000 Halogen Free

Brady Series R4400 (colors - red, blue, green, white)

Brady Series R4900 and R6200 (alternates)

REGULATORY/AGENCY APPROVALS

UL: B- 430 is a UL Recognized Component to UL969 Labeling and Marking Standard when printed with the Brady Series R6000

Halogen Free and the Brady Series R4900 ribbons. See UL file MH17154 for specific details. UL information can be accessed on

line at UL.com in the UL Product iQ area.

CSA: B-430 is CSA Accepted to C22.2 No.0.1595 Adhesive Labels Standard when printed with the Brady Series R6000 Halogen

Free ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at

https://www.csagroup.org/testing-certification/product-listing/

For information on the Weee-RoHS compliance status for a Brady Product go to one of the following websites:

In Canada: www.bradycanada.ca/weee-rohs

In Europe: www.bradyeurope.com/rohs

In Japan: www.brady.co.jp/products/labelsuse/rohs

All other regions: www.bradyid.com/weee-rohs

Details:

PHYSICAL PROPERTIES

TEST METHODS

AVERAGE RESULTS

Thickness

ASTM D 1000

- Substrate

-Adhesive

-Total (excluding liner)

0.002 inch (0.0508 mm)

0.001 inch (0.0254 mm)

0.003 inch (0.0762 mm)

Adhesion to:

ASTM D 1000

Stainless Steel

20 minute dwell

51 oz/inch (56 N/100 mm)

24 hour dwell

57 oz/inch (62 N/100 mm)

- Painted Enamel

20 minutes dwell

51 oz/inch (56 N/100 mm)

24 hour dwell

54 oz/inch (59 N/100 mm)

- Textured ABS

20 minutes dwell

10 oz/inch (10 N/100 mm)

24 hour dwell

10 oz/inch (10 N/100mm)

- Polypropylene

20 minutes dwell

36 oz/in (40 N/100 mm)

24 hour dwell

39 oz/in (42 N/100 mm)

- Polyester Powder Coated Paint

20 minutes dwell

32 oz/in (35 N/100 mm)

24 hour dwell

43 oz/in (47 N/100 mm)

Tack

ASTM D 2979

Polyken™ Probe Tack

0.5 second dwell

26 oz (800 g)

Dielectric Strength

ASTM D 1000

8400 volts

Summary of content (3 pages)

PAGE 1
Technical Data Sheet BRADYBONDZ™ B-430 THERMAL TRANSFER PRINTABLE GLOSSY CLEAR POLYESTER LABEL STOCK TDS No. B-430 Effective Date: 10/05/2022 Description: GENERAL Print Technology: Thermal transfer Materials Type: Clear polyester Finish: Glossy Adhesive: Permanent acrylic APPLICATIONS Rating and serial plates using alphanumerics, barcodes, graphic symbols and logos that require name plate quality.
PAGE 2
Performance properties tested on B-430 printed with the Brady Series R6000 Halogen Free and the Brady Series R6200 ribbons. Printed samples were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environments. Unless noted, results are the same for both ribbons. PERFORMANCE PROPERTIES TEST METHOD TYPICAL RESULTS High Service Temperature 30 days at various temperatures No visible effect to label at 100°C.
PAGE 3
SAE 20 WT Oil at 70°C No visible effect 1 1 1 1 MIL 5606 Oil No visible effect 1 1 1 1 Formula 409® Cleaner No visible effect 1 1 1 1 NorthwoodsTM Buzz Saw Citrus Degreaser No visible effect 1 1 1 1 Deionized Water No visible effect 1 1 1 1 Rating Scale: 1= no visible effect 2= slight smear or print removal, detectable but minimal smear 3= moderate smear or print removal (print still legible) 4= severe smear or print removal (print illegible or just barely legible) 5= complete