Datasheet

ManualsBrandsBrady ManualsLabel Printer ConsumablesLabel Roll, Nylon, 9.53 x 9.5mm, 240pcs, White

Technical Data Sheet

BRADY B-499 THERMAL TRANSFER / DOT MATRIX PRINTABLE NYLON CLOTH LABEL

TDS No. B-499

Effective Date: 03/25/2019

Description:

GENERAL

Print Technology: Thermal transfer

Material Type: Polyamide coated nylon cloth

Finish: Matte white

Adhesive: Permanent acrylic

APPLICATIONS

Wiremarking and general labeling applications

B-499 is not recommended for outdoor use.

RECOMMENDED RIBBONS

Thermal Transfer Ribbons

Brady Series R4300

Brady Series R4900

Brady Series R6000 Halogen Free

Brady Series R6200

Brady Series R4500 colored (red, blue and green)

Dot Matrix Ribbons

Brady Series R5000

REGULATORY/AGENCY APPROVALS

UL: B-499 is a UL Recognized Component to UL969 Labelling and Marking Standard when printed with Brady Series R4300,

R4900, R6000 Halogen Free thermal transfer ribbons and Brady Series R5000 dot matrix ribbon. See UL file MH17154 for

specific details. UL information can be accessed online at UL.com. Search in Certifications area.

CSA: B-499 is CSA Accepted to C22.2 No.0.15-95 Adhesive Labels Standard when printed with Brady Series R4300 thermal

transfer ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa-

international.org.

For information on the Weee-RoHS compliance status for a Brady Product go to one of the following websites:

In Canada: www.bradycanada.ca/weee-rohs

In Europe: www.bradyeurope.com/rohs

In Japan:  www.brady.co.jp/products/labelsuse/rohs

All other regions: www.bradyid.com/weee-rohs

SPECIAL FEATURES

DIN VDE 0472 Part 815: Brady B-499 meets requirements of a halogen-free material per DIN VDE 0472 part 815. (Statement

based on review of product construction and confirmation halogen content test run at an independent test laboratory)

Details:

PHYSICAL PROPERTIES

TEST METHODS

AVERAGE RESULTS

Thickness

ASTM D 1000

-Substrate

-Adhesive

-Total (excluding liner)

0.0045 inch (0.115 mm)

0.0020 inch (0.051 mm)

0.0065 inch (0.166 mm)

Adhesion to:

ASTM D 1000

-Stainless Steel

20 minute dwell

45 oz/inch (50 N/100 mm)

24 hour dwell

80 oz/inch (88 N/100 mm)

-Textured ABS

20 minute dwell

35 oz/inch (39 N/100 mm)

24 hour dwell

40 oz/inch (44 N/100 mm)

-Polypropylene

20 minute dwell

24 oz/inch (26 N/100 mm)

24 hour dwell

24 oz/inch (26 N/100 mm)

Summary of content (4 pages)

PAGE 1
Technical Data Sheet BRADY B-499 THERMAL TRANSFER / DOT MATRIX PRINTABLE NYLON CLOTH LABEL TDS No. B-499 Effective Date: 03/25/2019 Description: GENERAL Print Technology: Thermal transfer Material Type: Polyamide coated nylon cloth Finish: Matte white Adhesive: Permanent acrylic APPLICATIONS Wiremarking and general labeling applications B-499 is not recommended for outdoor use.
PAGE 2
Tack ASTM D 2979 Polyken™ Probe Tack (1 second dwell, 1cm/sec separation) PSTC-7 (except use 1/2" x 1" sample) ASTM D 1000 -Machine Drop Shear Tensile Strength and Elongation 29 oz (900 grams) 9 hours 80 lb/in (1400 N/100 mm), 50% Performance properties tested on B-499 printed with the Brady Series R4300, R4900, R6000 Halogen Free and R6200 thermal transfer ribbons and the Brady Series R5000 dot matrix ribbon.
PAGE 3
After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.
PAGE 4
All S.I. Units (metric) are mathematically derived from the U.S. Conventional Units. Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria.