Datasheet

Details:
PHYSICAL PROPERTIES
TEST METHODS
AVERAGE RESULTS
Thickness
ASTM D 1000
-Total Thickness
0.0040 inch (0.102 mm)
Adhesion to:
-Stainless Steel
-Polypropylene
ASTM D 1000
20 minute dwell
24 hour dwell
20 minute dwell
24 hour dwell
38 oz/in (42 N/100 mm)
49 oz/in (54 N/100 mm)
25 oz/in (28 N/100 mm)
33 oz/in (36 N/100 mm)
Tack
ASTM D 2979
Polyken™ Probe Tack
(1 second dwell, 1 cm/sec separation)
13.3 oz (378 g)
Drop Shear
PSTC-7 (except use 1/2" x 1" sample)
3.3 hours
Tensile Strength and Elongation
ASTM D 1000
-Machine
-Cross
12 lbs/in (210 N/100 mm), 152%
11 lbs/in (193 N/100 mm), 195%
Flammability
ASTM D 1000
Average Burn Time
ABT less than 10 seconds
Performance properties tested with white printable zone of B-427 printed with Brady Series R4300 black thermal
transfer ribbon. Samples wrapped around 0.080” OD TFE wire in a self-laminating format.
PERFORMANCE PROPERTIES
TEST METHODS
TYPICAL RESULTS
High Service Temperature
30 days at 158°F (70°C)
Slight discoloration. No visible effect
at 140°F (60°C)
Low Service Temperature
30 days at -40°F (-40°C)
No visible effect
Humidity Resistance
30 days at 100°F (37°C), 95% R.H.
No visible effect
Weatherability
ASTM G 155, Cycle 1
30 days in Xenon Arc Weatherometer
No visible effect