Datasheet

ManualsBrandsBrady ManualsLabel Printer ConsumablesLabel Roll, Vinyl, 38.1 x 38.1mm, 180pcs, White

Technical Data Sheet

BRADY B-427 THERMAL TRANSFER PRINTABLE TRANSLUCENT VINYL

TAPE

TDS No. B-427

Effective Date: 2012-06-27

Description:

GENERAL

Print Technology: Thermal Transfer

Material Type: Translucent vinyl

Finish: Provided in a self-laminated format with a white printable zone and a translucent

overlaminating area.

Adhesive: Permanent acrylic

APPLICATIONS

B-427 is an excellent material for wire and cable identification. This material has good clarity,

conformability and is self-extinguishing. B-427 has outstanding water and oil resistance.

RECOMMENDED RIBBONS

Brady Series R4300 black and R4500 colored (red, blue, green) for thermal transfer printing.

REGULATORY/AGENCY APPROVALS

B-427 is UL Recognized to UL969 Labeling and Marking Standard when printed with the Brady

Series R4300 and R6200 ribbons. See UL files MH17154 for specific details.

B-427 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

Summary of content (4 pages)

PAGE 1
Technical Data Sheet BRADY B-427 THERMAL TRANSFER PRINTABLE TRANSLUCENT VINYL TAPE TDS No. B-427 Effective Date: 2012-06-27 Description: GENERAL Print Technology: Thermal Transfer Material Type: Translucent vinyl Finish: Provided in a self-laminated format with a white printable zone and a translucent overlaminating area. Adhesive: Permanent acrylic APPLICATIONS B-427 is an excellent material for wire and cable identification. This material has good clarity, conformability and is self-extinguishing.
PAGE 2
Details: PHYSICAL PROPERTIES Thickness TEST METHODS AVERAGE RESULTS ASTM D 1000 -Total Thickness 0.0040 inch (0.102 mm) Adhesion to: ASTM D 1000 -Stainless Steel 20 minute dwell 24 hour dwell -Polypropylene Tack 20 minute dwell 24 hour dwell 38 oz/in (42 N/100 mm) 49 oz/in (54 N/100 mm) 25 oz/in (28 N/100 mm) 33 oz/in (36 N/100 mm) ASTM D 2979 Polyken™ Probe Tack (1 second dwell, 1 cm/sec separation) 13.3 oz (378 g) Drop Shear PSTC-7 (except use 1/2" x 1" sample) 3.
PAGE 3
PERFORMANCE PROPERTIES CHEMICAL RESISTANCE White printable zone of B-427 was printed with Brady Series R4300 black thermal transfer ribbon. Samples wrapped around 0.080” OD TFE wire in a self-laminating format. Except where noted, testing was conducted at room temperature after 24 hour dwell. Testing consisted of 5 cycles of a 10 minute immersion in the specified test fluid followed by a 30 minute recovery period.
PAGE 4
Trademarks: ASTM: American Society for Testing and Materials (U.S.A.) Formula 409® is a registered trademark of the Chlorox Company Northwoods™ is a trademark of the Superior Chemical Corporation PSTC: Pressure Sensitive Tape Council (U.S.A.) Polyken™ is a trademark of Testing Machines Inc. SAE: Society of Automotive Engineers (U.S.A.) Skydrol® is a registered trademark of the Monsanto Company UL: Underwriters Laboratories Inc. (U.S.A.) Yellow 77® is a registered trademark of Ideal Industries, Inc.